サイト内検索
 

 HOME > 製品情報 >RENICE> Renice E7 series 2.5 inch PATA SSD

  GSUNAR

  CROSSROADS

  NEXCOM

  ACARD

  PROMISE

  RENICE

  SVEC

  DT-NIC
  RENICE E7 2.5 inch PATA IDE SSD

Renice E7 series 2.5 inch PATA SSD

Renice E7 series 2.5 inch PATA SSD comes with the standard 44PIN IDE interface, it is fully compliant with ATA-7 protocol and support UDMA-6 transfer rate. RENICE E7 2.5" IDE interface SSD has a tough outer metal case, enormous capacities, high reliability, low power consumption and anti-shock features that make it ideal to replace Hard Disk Drives.Furthermore, its characteristics of secure erase are obvious which widely used on the field of Industrial and Military.

 

 

High Light:

- Data Secure Erase

- Industrial Temperatuer: -40 to 85°C

Features:

- Form factor: 2.5 inch

- Interface: 44PIN IDE PATA                                         

- Capacity: 30GB~240GB(MLC type)

                    16GB~120GB(SLC type)

- Cache: 64MB

- Size: 100 x 70 x 9.5mm

- Weight: <40g

- Garbage collection function 

 

Performance:

- Max Read Rate: 120MB/sec

- Max Write Rate: 90MB/sec

- 4kb Random Read IOPS: 52,00

- Access Time: 0.1ms

 

Power Consumption and Environment

- Input voltage: 3.3V±5%

- Idle: <0.05W

- Active: <0.5W

- Operating temperature: 0 to 70°C(Commercial)

                                             -40 to 85°C(Industrial)

- Storage temperature: -40 to 85°C

- Shock Endurance: 1,500G

- Vibration Endurance: 20G

 

Reliability:

- MTBF: >1,000,000 hours

- High and Reliable ECC capability up to 18bits/sector

- S.M.A.R.T features optimized for SSD

- Bit error monitoring and managent

- Dynamic and static wear-leveling

- Dynamic bad block management

- SMART commands and additional SSD monitoring

- Support Auto garbage connection

Footnotes:

1. 1GB = 1,000,000,000 bytes. Some capacity not available for data storage.
2. Approximations based on LDE (Long-term Data Endurance) - an industry metric,introduced by Renice,that  quantifies how much

data can be written to a SSD in its lifespan expressed in terabytes written (TBW). Data is written using typical PC transfer size ,

written at a constant rate over the life of the SSD and data is retained for at least 1 year upon LDE exhaustion. Based on Renice

internal measurements, a typical client PC user writes 4GB/day.
3. MTBF - Mean time before failures based on part stress analysis.
4. Assumes DIPM (Device Initiated Power Management) is enabled.
5. Dimensions and Weight vary based on form factor type and capacity.

RENICE価格表を用意致しました。
こちらからご覧下さい。


Copyright DreamTechno Co., Ltd. All rights reserved.